Woods Machinery > Listings > New > New Eeger Beever™ 2131 Brush Chipper

New Eeger Beever™ 2131 Brush Chipper

Print page

2022 Eeger Beever™ 2131 Brush Chipper

With its large capacity and high-production volume reduction capabilities, this chipper is perfect for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities. The Eeger Beever 2131 boasts a huge list of options to customize the machine as well as more standard features than any other chipper in its class. The 2131 is also available tracked for right of way clearing, highway cleanups and hard‑to-reach areas requiring a self‑propelled unit for material access. An optional loader also is available.

*Price, if shown, is Manufacturer’s Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

Info

Manufacturer	Morbark
Model	Eeger Beever 2131
M.S.R.P.	Request a Quote

Specs

Height	10'1.5", 3.09 m
Width	8'5.5", 2.58 m
Length	21'2", 6.45 m
Gross Weight (Approx., Single Axle)	11,000 lb, 4,990 kg
Gross Weight (Approx., Tandem Axle)	12,200 lb, 5,534 kg
Gross Weight (Approx., Tracked)	15,000 lb, 6,804 kg
Suspension (Single Axle)	(1) 10,000 lb Torflex, (1) 4,536 kg Torflex
Suspension (Tandem Axle)	(2) 8,000 lb Torflex, (2) 3,629 kg Torflex
Infeed Opening (Height X Width)	36" x 59" wheeled/38" x 65" tracked, 91.4 x 149.9 cm wheeled/96.5 cm x 165.1 cm tracked
Throat Opening (Height X Width)	20.5" x 31", 52.1 x 78.7 cm
Drum (Width X Diameter)	23.5" x 37.4", 59.7 x 94.9 cm
Engine	CAT, GM or Perkins
Horsepower	147–275 HP, 109.6–205 kW
Fuel Capacity	60 gallons, 227.1 L
Hydraulic Capacity	41 gallons wheeled/ 44 gallons tracked, 155.2 L wheeled/166.5 L tracked
Frame	2" x 6" Tubular, 5.1 x 15.2 cm Tubular
Tires	235/75Rx17.5
Optional Tracks	400 mm Rubber or Steel Tracks
Hitch	2.5" Pintle, 6.4 cm Pintle
Optional Tracks	400 mm Rubber or Steel Tracks
Tracks Ground Speed (Low/High)	1.0/1.8 MPH, 1.6/2.9 km/h

Torqmax™ Feed Wheel
The TorqMax™ dual feed wheel compression system provides more than 7,500 lb/ft (10,169 Nm) of material pulling force.

Infeed
The 36″ high x 59″ wide (91.4 x 149.9 cm) infeed chute with 20.5″ high x 31″ wide (52.1 x 78.7 cm) throat opening allows for easy feeding of a variety of materials and reduces saw labor.

Reversing Auto-Feed
The reversing auto-feed system automatically stops forward feed and briefly backs material away from the drum for optimum engine performance while chipping.

Hydraulic Down Pressure
The Variable Force™ Hydraulic Down Pressure System eliminates the use of springs and creates up to 10,000 lb (4,535 kg) of perpetual down pressure.

Track Undercarriage Option
Take the chipper to the material with a choice of 400mm rubber or steel tracks, 4.84 PSI (33.4 kPa) ground pressure, low-speed and high-speed travel ranges of 1.0 MPH and 1.8 MPH (1.6/2.9 km/h).

Contact Information

This machine has been inspected by an authorized Bobcat dealer or service partner and includes additional services.

999 Route 33
Freehold, NJ 07728

45 Route 22 East Greenbrook, NJ 08812

1872 Pulaski Hwy
Bear, DE 19701

PHONE:

877.472.2228

EMAIL:

sales@woodsmachinery.com

Message us

Request a Quote

Using the form below

Condition	New
Year	2023
Make	Morbark
Machine type	Chipper
Engine	CAT, GM or Perkins
Fuel	Diesel
Horsepower	147–275 HP

Machine price ()

Interest rate (%)

Period (month)

Down Payment ()

Calculate

Monthly Payment

Total Interest Payment

Total Amount to Pay