Woods Machinery > Listings > New > New Eeger Beever™ 1415 Brush Chipper

New Eeger Beever™ 1415 Brush Chipper

Print page

2022 Eeger Beever™ 1415 Brush Chipper

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Eeger Beever 1415 is also available with tracks for right of way clearing, highway clean-ups and hard to reach areas requiring a self-propelled unit for material access. The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency.

*Price, if shown, is Manufacturer’s Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

Info

Manufacturer	Morbark
Model	Eeger Beever 1415
M.S.R.P.	Request a Quote

Specs

Height	8'5" wheeled/8' tracked, 2.56 m wheeled/2.44 m tracked
Width	5'11" wheeled/6'3" tracked, 1.8 m wheeled/1.9 m tracked
Length	15'5" wheeled/13'9" tracked, 4.7 m wheeled/4.2 m tracked
Gross Weight (Approximate)	5,500 lb wheeled/8,200 lb tracked, 2,495 kg wheeled/3,719 kg tracked
Suspension	7,000 lb Torflex, 3,175 kg Torflex
Infeed Opening (Height X Width)	31" x 60", 78.7 x 152.4 cm
Throat Opening (Height X Width)	14" x 15", 35.6 x 38.1 cm
Drum (Width X Diameter)	14.5" x 21.4", 36.8 x 54.3 cm
Feed Wheel (Width X Diameter)	11.5" x 9", 29.2 x 22.9 cm
Disc (Thickness X Diameter)	2" x 37", 5.1 x 94 cm
Engine	CAT, Perkins or PSI
Horsepower	49–145 HP
Fuel Capacity	24.5 gallons, 92.7 L
Hydraulic Capacity	17 gallons, 64.4 L
Frame	8.2 lb, 6" channel wheeled/2" x 4" tubular tracked, 3.7 kg, 15.2 cm channel wheeled/5.1 cm x 10.2 cm tubular tracked
Tires	(2) 235/80Rx16
Hitch	2.5" Pintle, 6.4 cm Pintle
Optional Tracks	400 mm Rubber Tracks
Tracks Ground Pressure	4.95 PSI, 34.1 kPa
Tracks Ground Pressure	1.0/1.8 MPH, 1.6/2.9 km/h

INFEED
The 60″ wide x 31″ (152.4 cm x 78.74 cm) high chute opening and 15″ wide x 14″ (38.1 cm x 35.56 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.

HYDRA-LIFT SYSTEM
The Hydra-Lift™ compression system with spring-assisted down pressure aids in feeding difficult limbs.

360° SWIVEL DISCHARGE
360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the chipper from the tow vehicle.

TRACK UNDERCARRIAGE OPTION
Take the chipper to the material with a two-speed, 72″ long x 11.5″ wide (182.9 cm x 29.2 cm), turf-friendly rubber track undercarriage and 4.95 PSI (34.1 kPa) ground pressure.

Contact Information

This machine has been inspected by an authorized Bobcat dealer or service partner and includes additional services.

999 Route 33
Freehold, NJ 07728

45 Route 22 East Greenbrook, NJ 08812

1872 Pulaski Hwy
Bear, DE 19701

PHONE:

877.472.2228

EMAIL:

sales@woodsmachinery.com

Message us

Request a Quote

Using the form below

Condition	New
Year	2023
Make	Morbark
Machine type	Chipper
Engine	CAT, Perkins or PSI
Fuel	Diesel
Horsepower	49–145 HP

Machine price ()

Interest rate (%)

Period (month)

Down Payment ()

Calculate

Monthly Payment

Total Interest Payment

Total Amount to Pay