The display is mounted to the cab’s upper cutouts. The camera is secured in a mount on the top center of the tailgate, the mount requires adding two 5/16th inch holes and one 13/16th hole in the tailgate. The harness is routed along the cab harness and main harness to the tailgate. It has one connector for the display at the right panel, one for the camera at the tailgate, and three connectors for power at the storage compartment located in the rear right of the cab: a 3 pin male connector which plugs into the cab harness accessory connector for power, a 3 pin female connector for other accessories to plug into for power if needed, and a connector with an in-line 5 amp fuse to protect the system.