• Monday - Friday 7:30am - 4:30pm. Green Brook open Saturday 8am -1pm

New Eeger Beever™ 1415 Brush Chipper

2022 Eeger Beever™ 1415 Brush Chipper

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Eeger Beever 1415 is also available with tracks for right of way clearing, highway clean-ups and hard to reach areas requiring a self-propelled unit for material access. The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency.

*Price, if shown, is Manufacturer’s Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

Info
Manufacturer Morbark
Model Eeger Beever 1415
M.S.R.P. Request a Quote
Specs
Height 8'5" wheeled/8' tracked, 2.56 m wheeled/2.44 m tracked
Width 5'11" wheeled/6'3" tracked, 1.8 m wheeled/1.9 m tracked
Length 15'5" wheeled/13'9" tracked, 4.7 m wheeled/4.2 m tracked
Gross Weight (Approximate) 5,500 lb wheeled/8,200 lb tracked, 2,495 kg wheeled/3,719 kg tracked
Suspension 7,000 lb Torflex, 3,175 kg Torflex
Infeed Opening (Height X Width) 31" x 60", 78.7 x 152.4 cm
Throat Opening (Height X Width) 14" x 15", 35.6 x 38.1 cm
Drum (Width X Diameter) 14.5" x 21.4", 36.8 x 54.3 cm
Feed Wheel (Width X Diameter) 11.5" x 9", 29.2 x 22.9 cm
Disc (Thickness X Diameter) 2" x 37", 5.1 x 94 cm
Engine CAT, Perkins or PSI
Horsepower 49–145 HP
Fuel Capacity 24.5 gallons, 92.7 L
Hydraulic Capacity 17 gallons, 64.4 L
Frame 8.2 lb, 6" channel wheeled/2" x 4" tubular tracked, 3.7 kg, 15.2 cm channel wheeled/5.1 cm x 10.2 cm tubular tracked
Tires (2) 235/80Rx16
Hitch 2.5" Pintle, 6.4 cm Pintle
Optional Tracks 400 mm Rubber Tracks
Tracks Ground Pressure 4.95 PSI, 34.1 kPa
Tracks Ground Pressure 1.0/1.8 MPH, 1.6/2.9 km/h
  • INFEED
    The 60″ wide x 31″ (152.4 cm x 78.74 cm) high chute opening and 15″ wide x 14″ (38.1 cm x 35.56 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.
  • HYDRA-LIFT SYSTEM
    The Hydra-Lift™ compression system with spring-assisted down pressure aids in feeding difficult limbs.

  • 360° SWIVEL DISCHARGE
    360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the chipper from the tow vehicle.
  • TRACK UNDERCARRIAGE OPTION
    Take the chipper to the material with a two-speed, 72″ long x 11.5″ wide (182.9 cm x 29.2 cm), turf-friendly rubber track undercarriage and 4.95 PSI (34.1 kPa) ground pressure.

Contact Information

This machine has been inspected by an authorized Bobcat dealer or service partner and includes additional services.

999 Route 33
Freehold, NJ 07728
45 Route 22 East Greenbrook, NJ 08812
1872 Pulaski Hwy
Bear, DE 19701
PHONE:
877.472.2228

Message us

    Your Name:
    Company Name:
    City/State:
    Your telephone number:
    Email:
    Your Message
    Request a Quote
    Using the form below
    Condition New
    Year 2023
    Make Morbark
    Machine type Chipper
    Engine CAT, Perkins or PSI
    Fuel Diesel
    Horsepower 49–145 HP
    Machine price ()
    Interest rate (%)
    Period (month)
    Down Payment ()
    Calculate
    Monthly Payment
    Total Interest Payment
    Total Amount to Pay