• Monday - Friday 7:30am - 4:30pm.
Woods Machinery > Listings > New > Exmark Lazer Z Series
Request a Quote
Using the form below

Exmark Lazer Z Series

Exmark Lazer Z Series full
Exmark Lazer Z Series full
Exmark Lazer Z Series full
Exmark Lazer Z Series full
Exmark Lazer Z Series full
Exmark Lazer Z Series full
Exmark Lazer Z Series full
Exmark Lazer Z Series full
Make Exmark
Model Lazer Z Series
Machine Type Mower
Engine Exmark, Kawasaki, Kohler, Vanguard, Yanmar
Engine Fuel Diesel, Electric, Gas
Horsepower 23.5 HP - 43.5 HP
Operating Weight 1,017 lbs - 3,250 lbs
Width 61.2″ to 144.9″

The most affordable model in the Lazer Z line, the E-Series gives an unbeatable combination of cut quality, productivity, durability and value. Choose a 48″, 52″ or 60″ UltraCut Series 4 deck, each with a redesigned discharge chute that spreads clippings over a wider area. Twin-cylinder Kawasaki or Vanguard commercial engines come with heavy-duty external air filters, and Hydro-Gear pump and motor units deliver forward speeds up to 11 mph. A full-suspension operator seat adds comfort through long work days, and like every Exmark zero-turn it delivers unmatched durability and long-term value. For more, see the Lazer Z S-Series.

Key Features:

  • Unibody Frame: A one-piece unibody frame gives more durability with fewer parts, a classic case of less is more.

  • Less Time at the Pump: A single 9.5-gallon fuel tank with a single fill location.

  • UltraCut Series 4 Deck: Formed and welded high-strength steel, full-floating, with maintenance-free spindles and splined blade drivers that stop bolt tightening on impact. The idler arm pivot bearings are maintenance-free too.

  • Tool-less Belt Removal: The deck and hydro belts install and come off without tools.

  • Reduced Maintenance: Just two annual grease points and maintenance-free sealed bearing spindles for maximum performance with minimum maintenance.

Specifications:

  • Models: LRE730GKA48DA3 (48″, 2-blade), LRE730GKA524A3 (52″), LRE730GKA604A3 (60″), LRE801GKA524A3 (52″), LRE801GKA604A3 (60″), LRE810CBV48DA3 (48″, 2-blade), LRE921GKA604A3 (60″)

  • Engines: Kawasaki FX730V, 726 cc, 23.5 HP; Kawasaki FX801V, 852 cc, 25.5 HP; Kawasaki FX921V, 999 cc, 31 HP; Briggs Vanguard 810 cc, 26 HP (LRE810CBV48DA3); all V-Twin, carbureted

  • Engine speed: 3,700 rpm (FX730V), 3,750 rpm (FX801V, FX921V), 3,800 rpm (Vanguard)

  • Fuel: gas, 9.5-gallon single tank with single fill location, mechanical float gauge

  • Starter: electric, 12-volt battery with 15-amp alternator

  • Air filter: heavy-duty canister

  • Drive: dual Hydro-Gear ZT-4400 hydrostatic transmissions with charge pumps, relief valves and independent replaceable filters

  • Speed: infinitely variable, 0 to 11.0 mph forward, 0 to 6.0 mph reverse

  • Steering: hydraulically dampened twin levers, fore/aft and 2-position height adjustment

  • PTO: MagStop electromagnetic 175 ft-lb clutch with spot brake (200 ft-lb on LRE921GKA604A3)

  • Deck: full-floating UltraCut Series 4, side discharge standard with molded chute, option to bag or mulch

  • Deck construction: formed, continuously seam-welded 10-gauge high-strength alloy top, 7-gauge side skirt, 7-gauge reinforcement plates welded at the spindle mounts

  • Cutting height: 1.5″ to 5.5″ in 0.25″ increments, foot-controlled deck lift

  • Blades: two 24.5″ (48″), three 18″ (52″) or three 20.5″ (60″), tip speed approx. 18,500 fpm

  • Spindles: no maintenance, sealed and non-greasable, 7.75″ cutter housing, 25 mm (0.98″) shaft, splined blade driver

  • Frame: unibody, welded heavy-duty 1.5″ x 3″ tubular steel

  • Tires: 13 x 6.5-6 smooth-tread pneumatic front casters with sealed ball bearings; 24 x 9.5-12 (48″, 52″) or 24 x 12-12 (60″) 4-ply Super Turf drive

  • Seat: deluxe suspension seat with foam flip-up armrests, fore/aft adjustment

  • Safety: Operator Presence Controls and drive system interlock with indicators, lever-actuated internal wet disc parking brake, 2-post foldable ROPS with seat belt

  • Standard: engine hour meter and cup holder

  • Productivity: 4.26 acres per hour (48″), 4.61 (52″), 5.32 (60″); for 3 to 5 acres, 5+ acres on the 60″

  • Dimensions: 61.2″ wide (48″), 64.7″ (52″), 72.7″ (60″); 87.8″ long (48″) or 84.6″; 70.1″ high

  • Curb weight: 1,017 lbs to 1,093 lbs, by model

  • Warranty: 5 years or 1,250 hours limited (no hour limit the first 2 years), commercial and consumer

For more than 30 years, the Exmark Lazer Z has been the gold standard in commercial zero-turn mowers. Pros and homeowners alike aspire to its cut quality, productivity, performance and long-term durability, and with easy maintenance and industry-leading durability designed in, it is the best choice for those who refuse to compromise.

The Lazer Z S-Series is the core of countless landscape pros’ fleets. Thirty years of refinement and innovation give it maximum durability and Exmark Signature cut quality, with larger decks and more powerful engines than the E-Series. Choose a 52″, 60″ or 72″ UltraCut Series 4 deck or a 60″ or 72″ UltraCut Rear Discharge deck, with a powerful Kawasaki or Rehlko (Kohler) EFI commercial engine. It has the power and productivity to make quick work of large jobs, with the reliability and long-term value Exmark owners expect. For the top of the line, see the Lazer Z X-Series.

Key Features:

  • Less Time at the Pump: A large 12-gallon fuel tank with a single fill location gives more runtime between fill-ups.

  • Built to Last: From the heavy-duty unibody frame to the formed and welded high-strength steel deck, it is built to thrive in extreme commercial cutting.

  • Onboard Diagnostics: A digital screen shows vital functions at a glance: electronic fuel gauge with low-fuel warning, battery voltage warning, hour meter and OPC safety switch. Troubleshooting made easy.

  • Easy to Service: Just four annual grease points, sealed maintenance-free spindles and quick, easy oil changes.

  • UltraCut Series 4 Deck: Formed and welded high-strength steel, full-floating, with maintenance-free spindles and splined blade drivers that stop bolt tightening on impact. The idler arm pivot bearings are maintenance-free too.

  • Tool-less Belt Removal: The deck and hydro belts install and come off without tools.

Specifications:

  • Models: LRS749AKC524A1 (52″), LRS749AKC604A1 (60″), LRS749AKC724A1 (72″) with Rehlko (Kohler); LRS801GKA524A1 (52″), LRS801GKA604A1 (60″), LRS801GKA604C1 (60″, Suspension Platform), LRS801GKA724A1 (72″), LRS801GKA60RA1 (60″ Rear Discharge), LRS801GKA72RA1 (72″ Rear Discharge) with Kawasaki

  • Engines: Rehlko (Kohler) Command EFI ECV749, 747 cc, 26.5 HP; Kawasaki FX801V V-Twin, 852 cc, 25.5 HP, carbureted; 3,750 rpm

  • Fuel: gas, 12-gallon single tank with single fill location, electronic sender

  • Starter: electric, 12-volt battery with 20-amp (Rehlko) or 15-amp (Kawasaki) alternator

  • Air filter: heavy-duty canister

  • Drive: two Exmark-exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart reservoir and spin-on filter; 12 cc pumps with 14.5 cu in motors, or 17.1 cu in motors with shock valve on the 72″ models

  • Speed: infinitely variable, 0 to 10.0 mph forward, 0 to 7.0 mph reverse

  • Steering: hydraulically dampened twin levers, fore/aft and 2-position height adjustment, 3-position adjustable dampers

  • PTO: MagStop electromagnetic 200 ft-lb clutch with spot brake

  • Deck: full-floating UltraCut Series 4, side discharge standard with molded chute, option to bag or mulch; or full-floating UltraCut Rear Discharge, rear discharge standard with option to mulch

  • Deck construction: 10-gauge seam-welded top, 7-gauge side skirt and formed, welded spindle mounts (Series 4); 7-gauge high-strength alloy top and side skirt (Rear Discharge)

  • Cutting height: 1.0″ to 5.5″ in 0.25″ increments, foot-controlled deck lift

  • Blades: three 18″ (52″), 20.5″ (60″) or 24.5″ (72″), tip speed approx. 18,500 fpm

  • Spindles: no maintenance, sealed and non-greasable, 7.75″ cutter housing, 25 mm (0.98″) shaft, splined blade driver

  • Frame: unibody, welded heavy-duty 1.5″ x 3″ tubular steel

  • Tires: 13 x 6.5-6 smooth-tread semi-pneumatic front casters; 23 x 9.5-12 (52″) or 24 x 12-12 (60″, 72″) 4-ply Grassmaster drive

  • Seat: deluxe bolstered suspension seat with Elastomeric Vibration Control, fore/aft adjustment

  • Safety: Operator Presence Controls and drive system interlock with indicators, lever-actuated disc parking brake, 2-post foldable ROPS with seat belt

  • Standard: engine hour meter and cup holder

  • Productivity: 4.84 acres per hour (60″), 5.81 (72″), for 5+ acres

  • Dimensions: 64.8″ wide (52″), 72.8″ (60″), 84.9″ (72″), 66.2″ (60″ Rear Discharge), 78.2″ (72″ Rear Discharge); 79.2″ to 86.1″ long; 70.5″ high

  • Curb weight: 1,136 lbs to 1,359 lbs, by model

  • Warranty: 5 years or 1,250 hours limited (no hour limit the first 2 years), commercial and consumer

For more than 30 years, the Exmark Lazer Z has been the gold standard in commercial zero-turn mowers. Pros and homeowners alike aspire to its cut quality, productivity, performance and long-term durability, and with easy maintenance and industry-leading durability designed in, it is the best choice for those who refuse to compromise.

For more than 30 years, the Lazer Z has been the choice of more landscape professionals than any other zero-turn, and for pros who demand the best durability, productivity, cut quality and innovation, the X-Series is the number one choice. With more configuration options than any other Exmark, it is the pinnacle of commercial mowers. Choose a 52″, 60″ or 72″ UltraCut Series 6 deck or the massive 96″ UltraCut Rear Discharge deck. Exclusive flow control baffles and Adapt tool-free deck rake adjustment give Exmark Signature cut quality and higher cutting speeds in any conditions. Powerful commercial V-Twin engines from Kawasaki, Rehlko (Kohler) and Vanguard, including big-block EFI models, power through the largest jobs, and a long-travel full-suspension seat with isolation bumpers gives a smoother ride and less fatigue. See the Lazer Z Diesel too.

Key Features:

  • UltraCut Series 6 Deck: Full-floating side-discharge design with dual-capture anti-scalp rollers and double-row sealed bearings, plus splined blade drivers that stop bolt tightening from impacts. The patented idler arm bearing needs only annual service. The 96″ Flex Wing deck is a rear-discharge design.

  • Vanguard Oil Guard System: 500-hour oil change intervals for more uptime and less maintenance, and engine oil runs 20 to 30 degrees cooler. On select models.

  • Adapt Your Cut: Adjust deck rake quickly from the operator seat without tools, to tune cut quality and performance for different turf types and conditions, especially wet, overgrown or lush turf and stemmy grasses and weeds.

  • Easy to Service: The rear engine guard comes off with just four bolts, a redesigned seat mount opens up access to the engine and hydro drive, and the deck and hydro belts install without tools.

  • Maximum Productivity: More power, faster control response, larger decks and a high-capacity hydro drive.

  • Superior Operator Comfort: An ergonomic seat with long-travel suspension and exclusive iso-mount seat isolation reduces fatigue, so crews work stronger, longer.

  • Built for Long Days: LED lights on the front and sides of the deck extend mowing time, and heavy-duty cast steel caster forks add durability.

Specifications:

  • Models: 52″ LRX801GKA526Q1, LRX850GKA526Q1; 60″ LRX801GKA606Q1, LRX820AKA606Q1, LRX850GKA606Q1, LRX921GKA606Q1, LRX980EKC606Q1, LRX993EBX606Q1; 72″ LRX820AKA726Q1, LRX921GKA726Q1, LRX980EKC726Q1, LRX993EBX726Q1; 96″ Rear Discharge LZX980EKC96RW0

  • Engines: Kawasaki FX801V, 852 cc, 25.5 HP; FX850V, 852 cc, 27 HP; FX921V, 999 cc, 31 HP (carbureted); Kawasaki FX820V (FX820 EVO) EFI, 822 cc, 34.5 HP; Rehlko (Kohler) Command Pro EFI ECV938, 999 cc, 38 HP; Vanguard BIG BLOCK V-Twin EFI with Oil Guard, 993 cc, 37 HP

  • Fuel: gas, 12-gallon single tank with single fill location, electronic sender

  • Starter: electric, 12-volt battery with 15-, 20- or 30-amp alternator by model (40-amp on the 96″)

  • Air filter: heavy-duty canister

  • Drive: two Exmark-exclusive Parker unitized pump and wheel motor systems with shock valve, integrated cooling fans, 1.7-quart reservoir and spin-on filter; 12 cc or 16 cc pumps with 17.1 cu in motors (16 cc pumps and 18 cu in motors on the 96″)

  • Speed: 0 to 10.0 mph forward, 0 to 6.0 reverse (52″); 0 to 11.5 forward, 0 to 7.0 reverse (60″, 72″); 0 to 10.5 forward, 0 to 6.0 reverse (96″)

  • Steering: hydraulically dampened twin levers, fore/aft and 2-position height adjustment, 3-position adjustable dampers

  • PTO: MagStop electromagnetic clutch with spot brake, 200 ft-lb (FX801V, FX850V) or 250 ft-lb

  • Deck: full-floating UltraCut Series 6 with heavy-duty spindles, side discharge standard, option to bag or mulch, Adapt system; 96″ full-floating UltraCut Rear Discharge with finish cut baffles standard, rear discharge improvement baffles by kit

  • Deck construction: 10-gauge seam-welded top, 7-gauge side skirt and formed, welded spindle mounts; 7-gauge high-strength alloy top and side skirt on the 96″

  • Cutting height: 1.0″ to 5.5″ in 0.25″ increments; foot-controlled deck lift, electric-over-hydraulic push-button lift on the 96″

  • Blades: three 18″ (52″), 20.5″ (60″) or 24.5″ (72″), four 24.5″ (96″), tip speed approx. 18,500 fpm

  • Spindles: no maintenance, sealed and non-greasable, 7.75″ cutter housing, 30 mm (1.18″) shaft, splined blade driver (25 mm with double-row bearings on the 96″)

  • Frame: unibody, welded heavy-duty 1.5″ x 3″ tubular steel

  • Tires: 13 x 6.5-6 smooth-tread semi-pneumatic front casters; 23 x 9.5-12 (52″) or 24 x 12-12 (60″, 72″) 4-ply Grassmaster drive; 24 x 12-12 4-ply Turf Master on the 96″

  • Seat: deluxe bolstered suspension seat with Elastomeric Vibration Control on the Seat Isolation System, fore-aft slide and flip-up

  • Safety: Operator Presence Controls and drive system interlock with indicators, lever-actuated disc parking brake, 2-post foldable ROPS with seat belt

  • Standard: engine hour meter, USB plug-in, LED lights, phone tray and cup holder; the 96″ has an hour meter, cup holder and RED Technology onboard intelligence

  • Productivity: 4.19 acres per hour (52″), 5.56 (60″), 6.68 (72″), 8.13 (96″)

  • Dimensions: 64.8″ (52″), 72.8″ (60″), 84.9″ (72″) wide; 96″: 101.3″, 72.5″ folded at 3″ cut height; 83.1″ to 95.8″ long; 70.5″ high

  • Curb weight: 1,200 lbs to 1,304 lbs; 2,200 lbs (96″)

  • Warranty: 5 years or 1,500 hours limited (no hour limit the first 2 years), commercial and consumer

For more than 30 years, the Exmark Lazer Z has been the gold standard in commercial zero-turn mowers. Pros and homeowners alike aspire to its cut quality, productivity, performance and long-term durability, and with easy maintenance and industry-leading durability designed in, it is the best choice for those who refuse to compromise.

When maximum productivity, durability and cut quality come first, the Lazer Z Diesel is the right choice. With the industry-leading 144″ UltraCut Flex Wing deck it mows 11.5 acres per hour, making it the most productive mower Exmark has built. A Yanmar diesel engine and large drive tires reach ground speeds up to 12.5 mph with the 96″ deck, and 60″ and 72″ UltraCut decks are available too. The flex wings on the 96″ and 144″ decks pivot 20 degrees up and 15 degrees down on sloping terrain. It is Exmark’s top-of-the-line, most productive mower, with unparalleled durability and precise maneuverability.

Key Features:

  • Improved Handling: The engine and radiator sit lower to the ground for a lower center of gravity, better traction and a smoother ride.

  • Reduced Maintenance and Service: An efficient powertrain with no drive belts means less maintenance and longer service intervals, and tool-less belt access plus a removable floor pan make servicing easy.

  • Fuel Capacity: 12.0 gallons in two tanks for longer work intervals and fewer fill-ups.

  • Hydraulic Deck Lift: Standard on every diesel unit, for easy cut height changes and quick transport.

  • Ground Speed: Large drive tires reach up to 12.5 mph on machines with the 1.6-liter Common Rail engine, with superior traction and handling on varied terrain.

  • Productivity: Exmark’s most productive diesel machines ever, a great fit for universities, municipalities and other large properties.

  • On-Board Intelligence: Next-generation RED technology for machine efficiency, ease of use and durability, with defined performance modes to control power and efficiency.

  • Five-Year Warranty: A five-year limited warranty is standard on every Lazer Z Diesel sold in the U.S. or Canada.

Specifications:

  • Models: LZS80TDYM604W0 (60″), LZS80TDYM724W0 (72″) with UltraCut Series 4 side discharge; LZS80TDYM72RW0 (72″), LZS88CDYM96RW0 (96″), LZS86TDYM12RW0 (144″) with UltraCut Rear Discharge

  • Engines: Yanmar 3TNV80FT, 1,267 cc, 25 HP, electronically governed IDI turbo diesel, 2,600 rpm (60″, 72″); Yanmar 3TNV88C, 1,642 cc, 37 HP, common rail, 3,000 rpm (96″); Yanmar 3TNV86CT, 1,568 cc, 43.5 HP, common rail with fuel cooler, 3,000 rpm (144″)

  • Fuel: diesel, 12-gallon side tanks, mechanical float gauge

  • Starter: electric, 12-volt battery with 55-amp alternator (175-amp on the 144″)

  • Air filter: heavy-duty canister with electronic vacuum sensor

  • Drive: Kanzaki KPS-18T transmission with 18 cc pumps, spin-on filter and hydraulic oil cooler; Hydro-Gear HGM-18 motors on the 60″ and 72″ models, 2-speed Danfoss axial piston motors with Omni planetary gear reduction on the 144″

  • Speed: 0 to 11.0 mph forward, 0 to 6 reverse (60″, 72″); 0 to 12.5 forward, 0 to 7.0 reverse (96″); 144″: 0 to 10 mph low or 0 to 17 mph high forward, 0 to 6 or 0 to 10 mph reverse

  • Steering: hydraulically dampened twin levers, fore/aft and 2-position height adjustment, 3-position adjustable dampers

  • PTO: integrated wet clutch in the transmission, drive shaft to a right-angle gearbox on the deck

  • Deck: full-floating UltraCut Series 4 side discharge with molded chute, option to bag or mulch; or full-floating UltraCut Rear Discharge, finish cut baffles included on the 96″ and 144″, baffle kit available for the 72″

  • Cutting height: 1.0″ to 5.5″ in 0.25″ increments, hydraulic deck lift

  • Blades: three 20.5″ (60″), three 24.5″ (72″), four 24.5″ (96″), six 24.5″ (144″); tip speed approx. 17,600 fpm (60″) or 18,400 fpm (96″, 144″)

  • Spindles: no maintenance, sealed and non-greasable, 7.75″ cutter housing, 25 mm (0.98″) shaft, double-row bearings top and bottom, splined blade driver

  • Frame: welded heavy-duty 1.5″ x 3″ x 3/16″ tubular steel

  • Tires: 15 x 6.0-6 smooth-tread semi-pneumatic front casters; 6-ply drive tires, 26 x 12-12 (60″), 27 x 12-12 (72″), 28 x 12-12 (72″ Rear Discharge), 30 x 12-12 (96″), 29 x 12-12 (144″)

  • Seat: deluxe two-tone bolstered suspension seat with Elastomeric Vibration Control on the Seat Isolation System (4″ travel on the 96″ and 144″)

  • Safety: Operator Presence Controls and drive system interlock with indicators, lever-actuated internal wet disc parking brake (spring-applied, hydraulic-release on the 144″), 2-post foldable ROPS with seat belt

  • Standard: 12-volt plug-in, engine hour meter, cup holder, RED Technology onboard intelligence

  • Productivity: 5.32 acres per hour (60″), 6.39 (72″), 9.68 (96″), 11.61 (144″), for 5+ acres

  • Dimensions: 72.8″ (60″), 84.9″ (72″), 78.2″ (72″ Rear Discharge) wide; 96″: 101.2″, 72.5″ folded at 3″ cut height; 144″: 144.9″, 84″ folded at 3″ cut height; 96.43″ to 101.3″ long; 71.8″ high (72.6″ on the 144″)

  • Curb weight: 1,915 lbs (60″), 1,930 lbs (72″), 2,041 lbs (72″ Rear Discharge), 2,650 lbs (96″), 3,250 lbs (144″)

  • Warranty: 5 years or 1,500 hours limited (no hour limit the first 2 years), commercial and consumer

For more than 30 years, the Exmark Lazer Z has been the gold standard in commercial zero-turn mowers. Pros and homeowners alike aspire to its cut quality, productivity, performance and long-term durability, and with easy maintenance and industry-leading durability designed in, it is the best choice for those who refuse to compromise.

Combine the industry-leading Lazer Z with the HyperCell power system and you get the Lazer Z V-Series electric zero-turn. It gives landscape pros an edge on contracts with sound ordinances or zero engine exhaust mandates, delivering the cut quality, productivity and commercial durability you expect from Exmark in a quiet, fast, low-maintenance electric mower. HyperCell gives up to 7+ hours of runtime per charge, so you can mow all day without charging. Patent-pending management software gives precise maneuverability with consistent, predictable control, and Horizon360 Connect remote software gives full app-based access to settings, location and data. It comes with an Adapt-equipped 60″ Electric Series 4 deck.

Key Features:

  • Adapt Your Cut: Adjust deck rake quickly from the operator seat without tools, to tune cut quality and performance for different turf types and conditions, especially wet, overgrown or lush turf and stemmy grasses and weeds.

  • HyperCell: Zero engine exhaust emissions and up to seven hours of runtime per charge, from a standard 10-pack HyperCell battery system.

  • 60″ Electric Series 4 Deck: Formed and fully welded high-strength 7-gauge alloy steel, with no belts: three commercial high-torque electric blade motors do the work.

  • Commercial High-Torque Drive System: Instant torque with no belts to transfer power, and you can vary blade tip and drive speed to match conditions or save battery.

  • No Engine: No more oil and gas mess.

Specifications:

  • Model: LZV060B2360A00

  • Power: 60-volt 23.4kWh HyperCell battery system, ten HyperCell batteries, battery charge level indicator

  • Drive: two Exmark-exclusive Dana planetary gearset electric motors

  • Speed: infinitely variable, 0 to 11.0 mph forward, 0 to 6 mph reverse

  • Steering: hydraulically dampened twin levers, fore/aft and 2-position height adjustment

  • Controls: proprietary onboard control system

  • Deck: 60″ full-floating Electric Series 4, side discharge standard with molded chute, option to bag or mulch

  • Deck construction: formed, seam-welded 7-gauge high-strength alloy top and side skirt

  • Cutting height: 1.0″ to 5.0″ in 0.25″ increments, foot-controlled deck lift

  • Blades: three 20.5″, tip speed approx. 17,500 fpm

  • Blade motors: no-maintenance electric deck motors, 7.75″ motor housing, 25 mm (0.98″) shaft

  • Frame: unibody, welded heavy-duty 2″ x 3″ tubular steel

  • Tires: 13 x 6.5-6 smooth-tread semi-pneumatic front casters on cast steel forks; 24 x 12-12 4-ply Grass Master drive

  • Seat: deluxe two-tone bolstered suspension seat with Elastomeric Vibration Control on the Seat Isolation System

  • Safety: Operator Presence Controls and drive system interlock with indicators, spring-applied, electrically released dry parking brake, 2-post foldable ROPS with seat belt

  • Standard: USB plug-in, hour meter and cup holder

  • Productivity: 5.32 acres per hour, for 5+ acres

  • Dimensions: 75.4″ wide, 82.3″ long, 71.8″ high

  • Curb weight: 1,414 lbs

  • Warranty: 5 years or 1,250 hours limited (no hour limit the first 2 years), commercial and consumer

For more than 30 years, the Exmark Lazer Z has been the gold standard in commercial zero-turn mowers. Pros and homeowners alike aspire to its cut quality, productivity, performance and long-term durability, and with easy maintenance and industry-leading durability designed in, it is the best choice for those who refuse to compromise.

Choosing the Right Model

  • Lazer Z E-Series: The most affordable Lazer Z. 48″, 52″ or 60″ UltraCut Series 4 decks, Kawasaki or Vanguard engines from 23.5 to 31 HP, up to 11 mph and a 9.5-gallon tank.

  • Lazer Z S-Series: The fleet workhorse. 52″, 60″ or 72″ UltraCut Series 4 or 60″ and 72″ Rear Discharge decks, Kawasaki FX801V or Rehlko (Kohler) EFI engines, up to 10 mph and a 12-gallon tank.

  • Lazer Z X-Series: The top of the line. 52″ to 72″ UltraCut Series 6 decks or a 96″ Rear Discharge Flex Wing deck, 25.5 to 38 HP Kawasaki, Rehlko (Kohler) and Vanguard engines, Adapt deck rake adjustment, up to 11.5 mph.

  • Lazer Z Diesel: Yanmar diesel power from 25 to 43.5 HP, 60″ and 72″ side-discharge or 72″, 96″ and 144″ rear-discharge decks, up to 11.61 acres per hour. Exmark’s most productive mower.

  • Lazer Z V-Series: Battery-electric with HyperCell power for up to 7+ hours per charge and a 60″ Electric Series 4 deck. Made for contracts with sound ordinances or zero-emission mandates.

Common Features Across All Models

  • Lazer Z commercial zero-turn platform, more than 30 years in the making

  • Hydraulically dampened twin levers, adjustable fore/aft and to 2 height positions

  • Full-floating cutting deck

  • Infinitely variable ground speed

  • Operator Presence Controls and drive system interlock with safety interlock indicators

  • 2-post foldable ROPS standard with seat belt and latch

  • Drive wheel release to move the unit without power

  • Hour meter and cup holder standard

Message us

Quote Request
Financing calculator
Machine price ($)
Interest rate (%)
Period (month)
Down Payment ($)
Calculate
Monthly Payment
Total Interest Payment
Total Amount to Pay
Request a Quote
Using the form below
Make Exmark
Model Lazer Z Series
Machine Type Mower
Engine Exmark, Kawasaki, Kohler, Vanguard, Yanmar
Engine Fuel Diesel, Electric, Gas
Horsepower 23.5 HP - 43.5 HP
Operating Weight 1,017 lbs - 3,250 lbs
Width 61.2″ to 144.9″
Compare